For screen reader problems with this website, please call(703) 218-98557 0 3 2 1 8 9 8 5 5Standard carrier rates apply to texts.

We offer FREE Shipping! Same Day Shipping on most products too!

McIntosh® LCR Loudspeaker-Red Walnut-LCR80-Red Walnut

Model #: LCR80-Red Walnut
160614
McIntosh
At a Glance

McIntosh® LCR Loudspeaker-Red Walnut with sealed 3-way flexible placement and 75 to 300 watts power rating

$2,500.00Save
$2,500.00

FREE SHIPPING


People also viewed:

Get to know this product.

The LCR80 speaker projects an extremely wide sound-stage for a greater listening experience from a variety of seating positions, delivering an amazingly full-sounding performance for a speaker of such compact dimensions.

With its flexible design, it can be placed in horizontal, vertical or shelf mounted orientations. Complete mounting hardware is supplied for all positions. The machined alloy, high-frequency array is rotatable to optimize the sound for either vertical or horizontal placement without sonic compromise. McIntosh patented Low Distortion/High Performance (LD/HP®) woofers are combined with two midranges and a dedicated tweeter to deliver lifelike sound. Voiced to match the XR50 and XR100 speakers, the LCR80 may be used for the left, center or right channels in home theater systems or in special stereo applications.

Patented McIntosh Solid Cinch™ speaker binding posts allow for a simple yet secure connection to your speaker cables, helping to ensure the best possible audio performance. Fine gloss wood finishes are offered in Black, Pear Maple and Red Walnut. Amplifiers from 75 to 300 Watts are appropriate power for LCR80.

Patented LD/HP® Technology

  • The McIntosh Low Frequency Loudspeaker Elements feature the patented LD/HP Magnetic Circuit Design. This design, when compared to conventional Loudspeaker Drivers, reduces distortion significantly. It also increases power handling and efficiency. The rear vent through the magnetic assembly offers improved heat dissipation. The die cast basket has an open air area under the voice coil/spider assembly to prevent displacement noise. The polypropylene cone with a rubber surround has a four layer copper voice coil and is rigid to perform as a near perfect air piston. Altogether these advances in woofer design construction and materials produce the very important first several octaves of music, with a high degree of accuracy and superb transient response. This performance level rivals woofers twice the size of the LCR80 woofer.

Neodymium-Iron-Boron Alloy Magnets

  • The two inch Midrange Drivers and the three-quarter inch Dome Super Tweeter all use this Alloy. The Neodymium-Iron-Boron Alloy has the highest flux density per unit of volume. This allows for a smaller physical size driver and thus closer driver to driver placement for improved dispersion.

Low Harmonic and Intermodulation Distortion

  • The LCR80 Loudspeaker System is capable of reproducing the full dynamic range of a symphony orchestra with very low audible distortion of any kind.

High Power Handling

  • The Loudspeaker Elements and Crossover Components of the LCR80 are all chosen for use with amplifiers up to 300 watts, yet can be driven with a 75 watt amplifier.

Superior Imaging 

  • Locating the Super Tweeter between the multiple Midrange drivers generates a symmetrical polar response for superior imaging.

Versatile Operation and Placement

  • The LCR80 Loudspeaker System is designed for use in a multichannel system including the Front Channels (Left, Center and Right) or Surround Channels (Side and Back).

Rotatable Dispersion Pattern

The patented Rotatable Dispersion Pattern Baffle Board2 assures the same wide dispersion and excellent sonic imaging whether the LCR80 is positioned Vertically or Horizontally.

Loudspeaker Protection

  • The LCR80’s built-in speaker protection incorporates three automatic resetting solid-state devices in the crossover network. One protects the tweeter, one for the midrange drivers and one for the woofers.

Rear Stabilizer and Wall Mounting Brackets

  • The two Rear Stabilizers allow changing the vertical angle of ± 11 degrees. The On-Wall Mounting Brackets supplied with the LCR80 are for vertical or horizontal mounting. They allow for angled mounting of ±30 degrees.

McIntosh Custom Binding Posts

  • McIntosh patented gold plated output terminals3 deliver high current output. They accept large diameter wire and spade lugs. Banana plugs may also be used.

Loudspeaker Enclosure

  • The LCR80 Loudspeaker enclosure is constructed with non-parallel internal sides to reduce internal standing waves. The LCR80 is available in various real wood veneers with a high gloss polyester finish.
Useful Documents
Specifications

Construction

Enclosure Type:Sealed
Tweeter Composition:Titanium Dome
Midrange Size:2" x 2
Midrange Composition:Inverted Dome
Woofer Composition:Polymer-Cone

Other

Crossover Type:500Hz; 8kHz
Sold As:Each

Specifications

Sensitivity:81dB
Frequency Response:80Hz - 45kHz

Misc. Specs

Product Weight24
Manufacturer Warranty5 Year Parts
ColorRed
Impedance8 ohms
Depth (in.)8.38
Height (in.)8
Width (in.)24
Woofer Size6" x 2
WarningProposition 65 Warning for California Residents