For screen reader problems with this website, please call(703) 218-98557 0 3 2 1 8 9 8 5 5Standard carrier rates apply to texts.
Volume control consists of a precise volume regulator with matched resistance between left and right channel.
A special output impedance selector allows to adjust output impedance in three steps 5, 20 and 50 ohms to achieve better im-pedance matching between amplifier and headphones. Some experiments with different positions of output impedance selector are highly recommended to get the ultimate sound experience for your headphone.
An advanced multi-stage power supply with four different output voltages is used to achieve the best possible S/N ratio for out-standing reproduction of detail, dynamics and imaging with any dynamic headphone!
|Power Output||350 mW at 32 ohms / 60 mW at 300 ohms|
|Crosstalk||- 58 dB|
|Frequency Response||30 Hz - 20 kHz /(+0,2 dB; -0,05 dB)|
|THD+N||0.17% (XLR in, output impedance setting 5 ohm, load 32 ohm|
|S/N Ratio||99 dBA|
|Headphone Jack||3-pole ¼“ (6.3 mm ) co-axial jack|
|Line-Level Input||1 pair RCA + 1 pair XLR|
|Line-Level Output||1 pair RCA + 1 pair XLR|
|Outboard Power Supply||20 V/3 A DC, suitable for your country's mains supply|
|Power Consumption||1,3 A DC|
|Dimensions W x H x D||206 x 72 x 200 (209) mm|
|Weight||2150 g without power supply|